Unbounded Love – Stepped Up

Sometimes you just need to get your hands on some paper and markers! Step up the Unbounded Love project from yesterday by adding a few more layers, die cuts and some creative coloring on the inside.

Few things in life are better than love and creativity. With the Unbounded Love Bundle (available May 1, 2024), you’ll get both. Enjoy the experience as you pair greetings for the perfect sentiment on any occasion. Then use the labels, frames, scallops, shapes, leaves, and floral dies to create layered combinations. Or enjoy a simple style by quickly cutting out stamped sentiments. No matter what you do, you’ll find just the right fit to show your boundless love, appreciation, support, celebration, sympathy, and care.

Measurements

Full list of supplies needed, listed below. A die cutting machine is needed for this card.
Melon Mambo Cardstock: 8 ½” x 5 ½”, score at 4 ¼”
Basic White:

  • 4” x 5 ¼” (Inside)
  • Scrap for sentiment

Highland Heather Cardstock: 4 1/8” x 5 3/8” for inside

Lemon Lime Twist Cardstock: scrap for sentiment matte

Berry Burst Cardstock: scrap for flower

Pumpkin Pie Cardstock: scrap for flower

Lemon Lolly Cardstock: scrap for flower

Flowering Zinnias Designer Series Paper (DSP):

  • 3 ¾” x 3 ¾”
  • 3 ¼” x 4”
  • Scrap strip for inside

Let’s Create

  1. Affix all stamps to Acrylic Blocks.
  2. Fold the Melon Mambo Card Base in half using a Bone Folder to sharpen the crease.
  3. Use Stampin’ Seal to adhere 3 ¾” x 3 ¾” DSP on an angle to card front.
  4. Use Stampin’ Seal to adhere 3 ¼” x 4” DSP at an angle over bottom layer
  5. Die Cut:
  6. Stamp sentiment in Flirty Flamingo on the die cut label.
  7. Attach to Lemon Lime Twist label matte
  8. Attach to card front with Stampin’ Dimensionals.
  9. Assemble the Zinnia and attach with Stampin’ Dimensionals.
  10. Tie a sweet little bow with Baker’s Twine and attach with Mini Glue Dots
  11. Sprinkle on some Rhinestone Basic Jewels
  12. Attach 4 1/8” x 5 3/8” Highland Heather to the inside.
  13. Stamp and use DSP strip to decorate the Basic White 4” x 5 ¼” for the inside and attach with Stampin’ Seal.
  14. Decorate your envelope.
  15. So cute! Now send it to someone special.
  16. Lemon Lime Twist label from Unbounded Love Dies
  17. Basic White label from Unbounded Love Dies
  18. Blackberry Bliss, Pumpkin Pie, and Lemon Lolly Zinnia flower and center from Simply Zinnia Dies
Shopping List
This project also uses the Unbounded Love Bundle Item #163384 $54.75 and Pretty in Pink Stampin’ Blends Combo Pack Item #163824 $11.00 available May 1, 2024

Recommended Stamper’s Toolkit ❤

Product List
Order online from the convenience of your own home or send me your order and I’ll take care of you. ❤ Either way, please use the host code MC649C6D. Order online AND, if your order is $50 or more using host code MC649C6D between now and the end of the month you’ll receive a free pack of embellishment as a THANK YOU gift from me. ❤ If your order is over $150, skip the host code, earn Stampin’ Rewards for free stuff yourself and I’ll still send you a free pack of embellishment as a THANK YOU gift from me. ❤

Unbounded Love – Simple Stamping

Sometimes you’re in a hurry and need to make a quick & easy card. The layout used in today’s card will get it done, and can easily be created with this beautiful Flowering Zinnias suite or products from your stash.

Few things in life are better than love and creativity. With the Unbounded Love Bundle (available May 1, 2024), you’ll get both. Enjoy the experience as you pair greetings for the perfect sentiment on any occasion. Then use the labels, frames, scallops, shapes, leaves, and floral dies to create layered combinations. Or enjoy a simple style by quickly cutting out stamped sentiments. No matter what you do, you’ll find just the right fit to show your boundless love, appreciation, support, celebration, sympathy, and care.

Measurements

Full list of supplies needed, listed below. A die cutting machine is needed for this card.
Melon Mambo Cardstock: 8 ½” x 5 ½”, score at 4 ¼”
Basic White:

  • 4” x 5 ¼” (Inside)
  • Scrap for sentiment

Flowering Zinnias Designer Series Paper (DSP):

  • 3 ¾” x 3 ¾”
  • 3 ¼” x 4”


Let’s Create

  1. Affix all stamps to Acrylic Blocks.
  2. Fold the Melon Mambo Card Base in half using a Bone Folder to sharpen the crease.
  3. Use Stampin’ Seal to adhere 3 ¾” x 3 ¾” DSP on an angle to card front.
  4. Use Stampin’ Seal to adhere 3 ¼” x 4” DSP at an angle over bottom layer.
  5. Die-Cut Basic White label from Unbounded Love Dies.
  6. Stamp sentiment in Flirty Flamingo on the die cut label.
  7. Attach to card front with Stampin’ Dimensionals.
  8. Tie a sweet little bow with Baker’s Twine and attach with Mini Glue Dots
  9. Stamp and decorate the Basic White 4” x 5 ¼” for the inside and attach with Stampin’ Seal.
  10. Decorate your envelope.
  11. So cute! Now send it to someone special.
Shopping List
This project also uses the Unbounded Love Bundle Item #163384 $54.75 available May 1, 2024

Recommended Stamper’s Toolkit ❤

Product List
Order online from the convenience of your own home or send me your order and I’ll take care of you. ❤ Either way, please use the host code MC649C6D. Order online AND, if your order is $50 or more using host code MC649C6D between now and the end of the month you’ll receive a free pack of embellishment as a THANK YOU gift from me. ❤ If your order is over $150, skip the host code, earn Stampin’ Rewards for free stuff yourself and I’ll still send you a free pack of embellishment as a THANK YOU gift from me. ❤

Irresistible Blooms in Flirty Flamingo

Thank you for your interest in this project. Some projects are exclusive to subscribers who will receive passwords by email.

Are you a subscriber? Awesome! Check your email for the password and enter it here to view this project.

Not yet subscribed?  We’d love for you to join us.  Subscribe to my email list and receive news, information and inspiration by email.

Big Irresistible Blooms

Custom colored big blooms steal the show on this pretty card. What color combo will you choose?

Meet the Irresistible Blooms Bundle– an online exclusive product. It’s time to make smiles bloom and create gorgeous all-occasion cards friends and family are sure to find artistically captivating! Combine the flower and leaf images from the die and stamp set to create beautiful floral pieces. Add multiple layers to your projects using swirly cutout shapes for projects that pop, or create your own peek-through cards!

Measurements

Full list of supplies needed, listed below. A die cutting machine is needed for this card.
Card base – White

                      5 ½” x 8 ½” scored at 4 ¼”

                      Scrap for stamping and die cutting

Pretty Peacock  – 3 ¾” x 5”

                                ¼” x 3 ¾”                          

Soft Sea Foam  – 3 ½” x 4 ¾”

Hello Irresistible Designer Series Paper – Soft Sea Foam and Pretty Peacock with leaf pattern all over

                                         ½” x 6”

                                         Soft Sea Foam with dots all over

                                         ½” x 6”


Let’s Create

  1. Affix all stamps to acrylic blocks.
  2. Fold and burnish card base at the score line using bone folder.
  3. Using the Soft Sea Foam with dots all over dsp, glue it from the upper left corner of the Soft Sea Foam panel to the lower right hand corner.  Make sure the tip of the Soft Sea Foam panel is in the center of the dsp at the top and bottom.  See photo above.
  4. Add 1 of the Soft Sea Foam and Pretty Peacock with leaf pattern all over strips to one side of the strip added in Step 3.  See photo above.
  5. Glue the other Soft Sea Foam and Pretty Peacock with leaf pattern all over strips to the other side of the strip added in Step 3.  The Soft Sea Foam with dots all over dsp will be sandwiched between the 2 Soft Sea Foam and Pretty Peacock with leaf pattern all over strips.  See photo above.
  6. Trim the excess dsp from the Soft Sea Foam panel so you get the rectangle shape again.
  7. Glue the ¼” x 3 ¾” piece of Pretty Peacock across the lower portion of the Soft Sea Foam panel just slightly below center.  See photo above.
  8. Add the panel from Step 7 to the Pretty Peacock panel.  Then attach to the card front centering on all sides.
  9. Stamp 1 large and 1 small flower and 1 of each of the leaves by inking the stamps with Soft Sea Foam and sponging the edges and centers with Pretty Peacock.
  10. Use the coordinating dies to cut out the stamped images.
  11. Add the large flower to bottom of the Soft Sea Foam panel with dimensionals so it is on top of the diagonal strips.  Repeat with the small flower so it is above the large flower.  See photo above.
  12. Use glue dots to add the triple leaf to the large flower and the double leaf to the small flower.  See photo above.
  13. Add some of the Pretty Peacock loose frosted dots to the card front
  14. Use the small flower and double leaf to decorate the inside of the card.
  15. Use the large flower and the triple leaf to decorate the envelope.

Shopping List

Recommended Stamper’s Toolkit ❤

Product List
Order online from the convenience of your own home or send me your order and I’ll take care of you. ❤ Either way, please use the host code MC649C6D. Order online AND, if your order is $50 or more using host code MC649C6D between now and the end of the month you’ll receive a free pack of embellishment as a THANK YOU gift from me. ❤ If your order is over $150, skip the host code, earn Stampin’ Rewards for free stuff yourself and I’ll still send you a free pack of embellishment as a THANK YOU gift from me. ❤

Irresistible Blooms Hello

Use the coordinating dies to create a focal image of dotted strands and leaves stamped in a matching color for this simple stamping quick & easy card.

Meet the Irresistible Blooms Bundle– an online exclusive product. It’s time to make smiles bloom and create gorgeous all-occasion cards friends and family are sure to find artistically captivating! Combine the flower and leaf images from the die and stamp set to create beautiful floral pieces. Add multiple layers to your projects using swirly cutout shapes for projects that pop, or create your own peek-through cards!

Measurements

Full list of supplies needed, listed below. A die cutting machine is needed for this card.

Card base – Pretty Peacock:

  • 5 ½” x 8 ½” scored at 4 ¼”
  • Scraps for stamping and die cutting

Basic White Cardstock

  • 3 ¼” x 4 ¼”
  • 3 ½” x 3 ½”
  • 5 1/4″ h x 4″ w (for inside)
  • Scraps for stamping and die cutting

Hello Irresistible Designer Series Paper- Lost Lagoon with dot lines: 3” x 4”

Let’s Create

  1. Affix all stamps to acrylic blocks.
  2. Fold and burnish card base at the score line using Bone Folder.
  3. Attach the Designer Series Paper (DSP) to the 3 ¼” x 4 ¼” Basic White cardstock with Stampin’ Seal.
  4. Use the dot strip die to die cut the side of the 3 ½” x 3 ½” piece of Basic White cardstock.  Save both pieces.
  5. Take the dot strip and cut it so there are 3 strips that match the piece of White you cut it from.  See photo above.
  6. Using the other piece of White that is solid, cut off the right side to the panel measures 2 1/8”.
  7. With Pretty Peacock ink, use a the Stamp Off technique to add dots all over the panel.  See photo above.
  8. Stamp the sentiment in the center of the left side of the panel from Step 7.  See photo above.
  9. Use Stampin Seal to attach the panel from Step 8 to the DSP panel from Step 3 so it is about ¼” from the right side and centered top and bottom.
  10. Add the dot strips from Step 5 using Mutlipurpose Glue so the dots fit into the spaces for the dots.  See photo above.
  11. Add the panel from Step 10 to the card front using Stampin’ Dimensionals centering it on all sides.
  12. Use the 2 leaf stamps and Pretty Peacock ink to stamp 2 of each leaf on Basic White scrap.  Use the coordinating die to cut them out.
  13. Add 1 of the double leaf images at the top left corner so the leaves point to the right, using Multipurpose Glue.  Use a Min Glue Dot to add 1 on the triple leaf images so it overlaps the double leaf and the leaves are pointing up.  See photo above.
  14. With a Mini Glue Dot add the other triple leaf images in the lower right hand corner for the White panel.  See photo above.
  15. Add the last double leaf image to the center of the right hand side of the White panel with a Mini Glue Dot.  See photo above.
  16. Use the dot stamp and triple leaf to stamp and decorate the 5 1/4″ h x 4″ w for the inside of the card and envelope.

Shopping List

Recommended Stamper’s Toolkit ❤

Product List
Order online from the convenience of your own home or send me your order and I’ll take care of you. ❤ Either way, please use the host code MC649C6D. Order online AND, if your order is $50 or more using host code MC649C6D between now and the end of the month you’ll receive a free pack of embellishment as a THANK YOU gift from me. ❤ If your order is over $150, skip the host code, earn Stampin’ Rewards for free stuff yourself and I’ll still send you a free pack of embellishment as a THANK YOU gift from me. ❤