Wishing You A Sweet Day Handmade Card

A classic combo- red, white and black! This time with a splash of bright green and a fancy fold- or maybe flip card. Unfold your heartfelt wishes for a sweet day with this fun card. I’ll show you how.

The Sweetest Cherries Bundle includes the Sweetest Cherries Stamp Set and the Cherries Builder Punch. Fill your cards and scrapbook pages with buckets of cherries. Stamp the cherries, then cut them out quickly and easily with the coordinating punch.

Measurements

Full list of supplies needed, listed below. A die cutting machine is needed for this card.
Cherry Cobbler Cardstock: 4 1/4″ h x 8 1/2″ w scored at 1 1/2″ and 7″ folded at the score lines to to 5 1/2″ h x 4 1/4″ w

Parakeet Party Cardstock: 3″ h x 4 1/4″ w (2)

Perfectly Penned Designer Series Paper (DSP): 4″ h x 5 1/4″ w

Basic White Cardstock:

  • 2 1/2″ h x 4″ w (3)
  • scrap for cherry, leaves and stems


Let’s Create

  1. Affix all stamps to Acrylic Blocks.
  2. Fold the Card Base in at score lines using a Bone Folder to sharpen the creases.
  3. On the edge of the Cherry Cobble Card Base, measure down from the top outer edge 3/4″ and up from the bottom outer edge 3/4″ on both sides. Make a mark with a pencil. Use your Stampin’ Snips to trim off from the pencil mark at a diagonal to the scroe line.
  4. Attach the DSP with Stampin’ Seal to the center inside background.
  5. Run the 2 1/2″ h x 4″ w Basic White Cardstock pieces (3) through the Stampin’ Cut & Emboss Machine with the Scalloped Countour dies.
  6. On one scalloped Basic White Cardstock piece, stamp “Wishing you a” in Parakeet Party ink.
  7. One one other scalloped Basic White Cardstock piece, stamp “Sweet” in Cherry Cobbler ink, and “day” in Parakeet Party ink.
  8. Attach the unstamped 2 1/2″ h x 4″ w Basic White Cardstock piece to the inside on top of the DSP.
  9. Wrap the “Wishing you a ” panel with Black & White Gingham ribbon, then attach to one of the Parekeet Party panels with Stampin Dimensionals before attaching to the left flap- being careful where you put the adhesive!
  10. Attach the “Wishing you a” to the right flap with Stampin’ Seal- also being careful where you put the adhesive.
  11. On Basic White Cardstock scrap, stamp the cherry in Cherry Cobbler, the leaves in Parakeet Party, and the stem in Crumb Cake. Then punch out with the Cherries Builder Punch.
  12. Use Mini Glue Dots and Multipurpose Glue to assemble the Cherry. Attach Cherry to the front, over the Gingham ribbon with Stampin’ Seal.
  13. Fold in the right side and then the left.
  14. Sprinkle on the Black Matte Dots
  15. Stamp and decorate the inside.
  16. Decorate your envelope.
  17. How fun! Who will you send it to?

Shopping List

Recommended Stamper’s Toolkit ❤

 

Sweet Birthday Wishes

The big SWEET in the Sweetest Cherries Bundle can be combined with the variety of words and phrases to create any number of cards and the cherries are so fun! Design inspired by Peggy Noe.

The Sweetest Cherries Bundle includes the Sweetest Cherries Stamp Set and the Cherries Builder Punch. Fill your cards and scrapbook pages with buckets of cherries. Stamp the cherries, then cut them out quickly and easily with the coordinating punch.

Measurements

Full list of supplies needed, listed below. A die cutting machine is needed for this card.
Basic White Thick Cardstock: 5 1/2″ w x 8 1/2″ h folded to 5 1/2″ w x 4 1/4″ h Card Base
Basic White Cardstock:

  • 3″ h x 3″ w
  • Scrap for tag, cherries and sweet

Tea Boutique Designer Series Paper (DSP): 3 1/2″ h x 5 1/4″ w

Let’s Create

  1. Affix all stamps to Acrylic Blocks.
  2. Fold the Card Base in half using a Bone Folder to sharpen the crease.
  3. Run the DSP through the Stampin’ Cut & Embossing machine with the Basic Borders Dies. Attach to the front of the card with Stampin’ Seal.
  4. Run the 3″ square Basic White Cardstock through the Stampin’ Cut & Embossing machine with the Gingham Embossing Folder and attach with Stampin’ Dimensionals.
  5. On the scrap Basic White Cardstock, stamp the Sweet, sentiment, and Cherries in Real Red ink, the Stems in Crumb Cake and the Leaves in Garden Green.
  6. Use the Cherries Builder Punch to punch the Cherries, Leaves and Stems. Use Mini Glue Dots, Multipurpose Glue and Stampin’ Dimensionals to assemble the Cherries. Attach with Stampin’ Dimensionals and Stampin’ Seal.
  7. Use Paper Snips to trim out the Sweet.
  8. Use your trimmer to cut the Sentiment down to a small rectangle, then use Paper Snips to flag one end.
  9. Attach the Sweet and sentiment with Stampin’ Dimensionals and Stampin’ Seal.
  10. Sprinkle on the Solid Faceted Gems.
  11. Stamp and decorate the inside and attach with Stampin’ Seal.
  12. Decorate your envelope.
  13. So cute! Now send it to someone special.

Shopping List

Recommended Stamper’s Toolkit ❤

 

Seascape Sunset Greeting Card

I love this combination of stamp sets, dies, and colors. What a serene setting. So peaceful.

Create incredible layered dioramas with the Layering Diorama Dies! These dies nest to create a 3D effect for unique diorama card fronts. For an easy but intricate looking diorama, use a minimum of 3 diorama layers with tonal cardstock to create depth-of-field. Want to create a safari escape? An underwater world? Or frame a space exploration? The diorama designs are versatile to fit a wide variety of diorama landscapes!

Measurements

Full list of supplies needed, listed below. A die cutting machine is needed for this card.

Card Base Basic White Thick Card Stock 8 ½” x 5 ½”, score at 4 ¼”
Basic White layer 4” x 5 ¼”, Die-Cut with Diorama Die (to use as a masking template)
Basic White layer 4” x 5 ¼”
Vellum Punched Dragonfly

Let’s Create

  1. Affix all stamps to Acrylic Blocks.
  2. Fold the Card Base in half using a Bone Folder to sharpen the crease.
  3. Create the scene
    • Use Diorama layer as a template.
    • Use Blending Brushes and the masking technique to create first the sky, and then the ocean. (I used large yellow stickies, but you could also use our masking paper.
    • Place the diorama mask on the Basic White layer.
    • Place large mask (yellow sticky) to cover the ocean while you create the sky.
    • Create the sky with Daffodil Delight and Calypso Coral ink and Blending Brushes.
    • Lift the sticky and use a new sticky to create a mask to cover the sky.
    • Create the ocean with Pool Party and Bermuda Bay ink and Blending Brushes.)
  4. Stamp the fish, the sentiment, and the plants in Tuxedo black ink.
  5. Stamp the sand in Sahara Sand ink.
  6. Wrap ribbon around layer, centered on the horizon line. Tie a bow. Adhere to card base with Stampin’ Dimensionals.
  7. Punch small dragonfly from vellum and adhere to sky. Place a small gem on the dragonfly.
  8. Stamp and decorate the inside.
  9. Decorate your envelope.
  10. Stunning!! Now send it to someone special.

Shopping List

Recommended Stamper’s Toolkit ❤

 

Sunset Card with Diorama Dies

A few die cuts and some amazing paper brings this card together in a jiffy.

Create incredible layered dioramas with the Layering Diorama Dies! These dies nest to create a 3D effect for unique diorama card fronts. For an easy but intricate looking diorama, use a minimum of 3 diorama layers with tonal cardstock to create depth-of-field. Want to create a safari escape? An underwater world? Or frame a space exploration? The diorama designs are versatile to fit a wide variety of diorama landscapes!

Measurements

Full list of supplies needed, listed below. A die cutting machine is needed for this card.

Card Base Pumpkin Pie Cardstock: 8 ½” x 5 ½”, score at 4 ¼”
Pumpkin Pie Cardstock: 4 ¼” x 5 ½”, Die-Cut with DIorama Die
Mango MelodyCardstock: 4 ¼” x 5 ½”, Die-Cut with next smallest DIorama Die
Designer Series Paper (DSP) Layer: 4 ⅛” x 5 ⅜”
Die-Cut Harvest Die in Cajun Craze Cardstock
Punched Dual Oval in coordinating Designer Series Paper
Inside: Basic White Cardstock 4″ h x 5 1/4″ w

Let’s Create

  1. Affix all stamps to Acrylic Blocks.
  2. Fold the Card Base in half using a Bone Folder to sharpen the crease.
  3. Die-Cut Harvest Die in Cajun Craze
  4. Punch Dual Oval in coordinating Designer Series Paper. Stamp sentiment in Cajun Craze.
  5. Assemble Card.
    • Adhere DSP to card base with liquid glue.
    • Adhere Mango Melody layer with liquid glue.
    • Adhere Pumpkin Pie layer with Stampin’ Dimensionals.
    • Adhere sentiment with liquid glue.
    • Adhere Harvest Die with liquid glue on the card base and Stampin’ Dimensionals on the inside.
  6. Sprinkle on the Glossy Dots.
  7. Stamp and decorate the inside and attach with Stampin’ Seal.
  8. Decorate your envelope.
  9. Stunning and so easy! Who needs a little hello? Put it in the mail.

Shopping List

Recommended Stamper’s Toolkit ❤